Bobrick B-68616 Horiz Two-wall Grab Bar 24×36

• Type-304, 18-gauge stainless steel tubing, 1-1⁄2″ diameter; satin finish
• Concealed 11-gauge stainless end and intermediate flanges; 3-1⁄4″ snap covers
• 24″ x 36″ two-wall bar; 1-1⁄2″ diameter; 1-1⁄2″ clearance from wall
• Supports loads in excess of 900 pounds if properly installed

The Bobrick B-68616 is a 24″ x 36″ two-wall grab bar with a 1-1⁄2″ diameter. It is made of 18-8, type-304, 18-gauge stainless steel tubing with a satin-finish, slip-resistant surface, and the ends are heliarc welded to the flanges. A peened surface is available by adding suffix .99 to the model number. The legs measure 24″ and 4″ + 32″, with an intermediate flange near the corner. Concealed 11-gauge stainless end and intermediate flanges are covered by 3-1⁄4″ snap flange covers. Bobrick states grab bars with 1-1⁄2″ clearance from the wall support loads in excess of 900 pounds if properly installed. The TDS includes ADA/ICC/CBC guidance to mount the bar 33″ minimum to 36″ above the finished floor.